405 Winchester with a belt

**Underhammer** · 03-15-2020, 09:46 AM

Originally Posted by charlie b

So what do belting dies look like.

They are just tapered dies that reduce diameter .010 each [.007-.008]. Takes 2 dies, then the third one has a sharp edge to help seat in the belt.
Third die is used in an arbor press.
Then I finish them in a lathe.
All home made stuff.
CH4D use to make these, might contact them.

**Robinhood** · 03-15-2020, 11:46 AM

targets?

**Underhammer** · 03-15-2020, 03:40 PM

Originally Posted by Robinhood

targets?

https://photos.app.goo.gl/iZHNXHW7aJ8NmHVr5
2570fps.
Can't get the photo to load, hope the link works.

**charlie b** · 03-15-2020, 08:29 PM

Originally Posted by Underhammer

They are just tapered dies that reduce diameter .010 each [.007-.008]. Takes 2 dies, then the third one has a sharp edge to help seat in the belt.
Third die is used in an arbor press.
Then I finish them in a lathe.
All home made stuff.
CH4D use to make these, might contact them.

Thanks.

**Underhammer** · 03-22-2020, 08:25 PM

https://photos.app.goo.gl/oQmH3wnQtAFHZWbB7

The lower shot was a scope adjustment, then fired the next three. 2545 FPS....300 TSX.

**Underhammer** · 03-23-2020, 11:30 AM

Both the 210 TSX and turned down Monoflex 208gr, will hit 3000 FPS!

That is a point blank range of 300 yds.

link to chart:

https://photos.app.goo.gl/kp4LSPyvJ12PqCcE9

I have a high scope at 2".