Here are some pictures of my reloading bench I built in my RV. I have a 41 foot Heartland Cyclone toy hauler and it has a 12X8 foot garage in the rear. I'm a full-time RVer and I'm currently in WI. We'll be heading west through the norther boarder states in a few weeks.

I used a 2"X6"X5' board for the bench. I made it this small so that I can park my car in the garage during travel to my destinations. The brackets are attached to the aluminum frame wall with four ¼ inch screws. It’s very solid. When I'm not reloading, I remove the presses and they are stored in a protected space. I can easy attach other equipment to the bench by using C-clamps. There's plenty of room for my RCBS ChargeMaster 1500 and the Sinclair Arbor Press. It's perfect for my needs. Since these pictures were taken I painted the bench gray.

After seeing and reading about Hammer's setup, he has given me some ideas. I need to find property that's long and narrow that I can park the RV on and shoot out the back of my RV.