Quote Originally Posted by Dave Hoback View Post
However, don’t hoop & holler if it won’t reach 6oz on your particular setup.

By The Way…. ​Not for nothing, but you have the Trigger/Sear pin in backwards. The pin should be inserted on the Sear/Bolt Release Lever side. (Picture below)
I do not want it in single digits that's just to low IMHO, just want it down as close as possible to what SAV-2 pull weight was. No problem reversing the pin, easy fix, I put it back the same way it came out of the previous trigger assuming it was correct.

Thanks for the help