They are slightly different. The pre-Accutrigger was two-piece connected by a rivet between the Sear & Bolt Release Lever. But then they did start using the newer style towards the years leading up to the Accutrigger. Where as the Post Accutrigger all used a Sear/Bolt Release Lever which is one piece flat, bent to shape by press machines. Although I’ve never tried swapping one for the other. The pin is the same, so I know it fits. But not sure on operation. I guess they can be swapped as some of the pre-Accutriggers used the one-piece bent style.

Pre-Accutrigger:


Post-Accutrigger:


Yeah, good luck finding one. Savage still makes them obviously…and they will gladly sell them and all other trigger parts town FFL. But without the FFL, they won’t give you the time of day. I’m working on making my own. I have some Alloy sheet steel Kim the correct thickness. But between shaping it as a flat, drilling the holes & being it to form, it’s quite a feet. Looking at making some jigs maybe. Not sure.