Originally Posted by
steve101610
I have a few of the new magpul 223 AICS mags and they have worked flawlessly in the 3 rifles I have tried them in. One is a xlr element chassis with an axis223 in it. One is a 10T 223 AI in a MDT XRS chassis. The last is a 12FV in a mcmillan A5 with a PTG stealth bottom metal. It is a 350 legend so I had to modify the mag a little to get the rounds to fit but it works perfectly. What you could try is put a stiffer spring in the mag release lever to hold the mag tighter or glue a piece of plastic to the front of the mag and sand it down until it fits just right in the bottom metal. These new magpul mags have been the only 223 AICS pattern mags that have fed 100% of the time so far. I have tried accurate-mag, ruger, and mdt mags and they all seem to have feed issues every once in a while.
Sent from my iPad using Tapatalk
Bookmarks