Quote Originally Posted by Mr.Snerdly View Post
All I did was clean it and check the action screws. They weren't torqued even close to what they should be. I got it without a scope but if yours came with a scope, check the base screws and ring screws. I would also use a thread locker on the base screws but don't bother on the ring screws. They are easily checked and if you want to change scopes you don't have to fight the thread locker. No one will agree on cleaning but I followed what Savage recommends on barrel break in. More than likely it didn't help but if it shot poorly I would always wonder if it might have been different if I followed their recommendations. It does take a little time to do but I would do it again.
Thank you I appreciate the input!! At the risk of sounding stupid what are action screws and how tight should they be?