Quote Originally Posted by 110Wonder View Post

Ok, so as I stated in the OP, neither Boyd's nor B&C make a center feed long action Savage stock with blind mag and heavy barrel channel. It's not the magazine conversion I'm worried about, it's the fact that those stagger feed stocks are not going to have holes for the action screws that match up with my 116 action.

The action screw spacing is the same on all Savage long action receivers - 110/111/112/114/or 116 Staggered feed or Center feed actions.

https://www.savageshooters.com/conte...Action-Lengths

Even if you can't get a heavy barreled inlet from Boyds, it only takes a short amount of time to open the barrel channel up with a piece of pipe and sandpaper. I've done it with a Boyds stock on my LH 12 FLVSS and also a factory stock when I installed a heavy barrel on my 93 GL 22 Magnum. There's plenty of wood left in the stocks.