Quote Originally Posted by PhilC View Post
I think what Fuj did was use the copper wire (formed in a hook so it stayed on the blade) to measure the actual weight it took to keep the blade depressed.

No way I'm buying the blade has an 8.5 - 10.5oz "pull" before touching the actual trigger. I have a target accutrigger on my 10fp that's set to a 10 pull average of 8.5ozs and I can assure you the blade is fully depressed before my finger ever touches the trigger. The varmint accutrigger on my 12FV with a 10 pull average breaking clean at 1.5lbs and I haven't touched that since it came out of the box.

Edit to add:

Decided to provide real data, these are "blade only" averages from both two rifles:

Target accutrigger - 4.2oz
Varmint accutrigger - 5.5oz

Don't have a standard accutrigger to test. Based on my results, it could be Fuj was referring to blade weight rather than blade pull. He'll have to elaborate.
Then WHY are you offering your un wanted $ 0.02 when this thread DID NOT ask about target or varmint triggers. ??