Quote Originally Posted by Texas10 View Post
NSS sells an action vice that has a cutout to keep the recoil lug from rotating during barrel installation.

http://northlandshooterssupply.com/w...ION-WRENCH.jpg
True, but looking at the pic it looks like it's setup for a standard lug, not an AccuStock lug which is shaped more like a Rem 700 lug.

Easiest solution would just be to drill & tap your AccuStock lug and use a small Fillister or Socket Cap head. Might have to turn the head down a little to get it to fit in the slot of your action, but that's easy enough to do by chucking the screw in your drill and spinning it while holding the head to a grinder wheel or belt sander. Just go slow and take it down a little at a time until it fits with just a little play.

You can also just drill it and press in an appropriate sized piece of drill rod to act as the pin.