As long as you keep your bolt head you will not have to set the headpace. Just adjust firing pin protrusion and go.
Does anyone know if you can replace the Axis style firing pin/spring assembly that comes on the model 11 with a model 10 or 12 version. I'm just not getting reliable ignition with this set up. I've done all the headspace checks and insured that I wasnt setting the shoulder back too far on my reloads and all of that. I just want to swap this crappy design assemble for the more reliable type with the sleeve. Please advise. Also if it is possible where is the best place to get the parts? Thanks.
As long as you keep your bolt head you will not have to set the headpace. Just adjust firing pin protrusion and go.
The Dunning-Kruger effect is alive and well.
You'll need the cocking sleeve also.
"As long as there's lead in the air....there's still hope.."
Thanks guys, I'll start looking for those components. Any idea where I might beable to find them?a
I think the BAS screw is different also. Buy the whole assembly.
The Dunning-Kruger effect is alive and well.
Bookmarks