You are on the right track with the Boyd’s Savage 10 SA, top bolt release, DBM stock. However the Savage AICS metal frame assembly will not work with the current DBM stock inlet without doing some dremel work. And you would need to check with Savage Arms to see if they will sell you the SA, AICS frame assembly since this part is fairly new and is most likely being reserved for new rifle production. I believe several of the aftermarket manufacturers of AICS bottom metal for Savage will inlet a stock for you. The follow thread shows how to DIY. http://www.savageshooters.com/showth...BM-AICS-Bottom
Bookmarks