Looks sharp Devin!
Neal
Yes, Yes you can. here is a straight 1.25" barrel on a Savage action using a barrel nut and recoil lug. The lug is bigger because of the previous use of the barrel but any thickness would work just fine.
[img width=600 height=358]http://i290.photobucket.com/albums/ll272/sinarms/100MEDIA_IMAG0005.jpg[/img]
[img width=337 height=450]http://i290.photobucket.com/albums/ll272/sinarms/0905002111a.jpg[/img]
[img width=337 height=450]http://i290.photobucket.com/albums/ll272/sinarms/0905002111.jpg[/img]
Looks sharp Devin!
Neal
Thanks Neal, I know there have been people in the past looking for such a thing
It's kind of hard to tell from the picture, does the barrel shank have a shoulder cut into it for the nut to sit in? Are you still headspacing it off the nut, or are you headspacing it off the shoulder? Is there a gap between the nut and shoulder when it's on and headspaced?
12F, McGowen 6.5x284 1-8" twist, Nightforce 12-42x BR<br />BVSS, McGowen barrel, 22-250 1-9" twist, Nikon 6-18x<br />16 FHLSS Weather Warrior, Sinarms 257 Roberts, Pentax 3-9<br />Stevens 200, 223 bone-factory-stock, Nikon 3-9x<br />Scratch-built BVSS, LW 243 1-8" twist, Viper 6.5-20x50 mil-dot
Bookmarks