WV1951, from this group of pictures it appears that your primers are not fully seated and a couple look to be backing out when fired. left to right #1, 3, 4 and # 5 is not fully seated in pocket.
Now it may be the angle of pic. or just my old eyes but if it were me I would clean up the primer pockets real good and use a lot more force and get them to seat fully.
I have used thousands of standard CCI SR primers and have never had a FTF, cratered or pierced one and my load is just shy of being compressed with a 60 gr. Sierra fbhp with a COAL of 2.221.
Another tid bit I personally shoot well over 5000 rounds of center fire each year and use nothing but standard CCI LR or SR primers with out complaints or problems.
I do agree with BigEd and maybe he will see the same thing with this set of pictures that I am seeing.