This is the stock off the 111 Xp that I bought which is a totally different dbm system.
Sent from my iPhone using Tapatalk
Ok so I'm in the process of doing my first build. I ordered a 111 Xp 300 mag, criterion barrel, and a gamescout McMillan stock. Ok where I went wrong is ordering my stock to find out it is inletted for a savage 110 bottom bolt release dbm. Little did I know the 111 has a way crappier dbm than the 110 so now I have an expensive stock that I need bottom metal for. I have looked at cdi but I was wondering if I can order a factory bottom metal and mag which is what the stock was inletted for? Below is a picture of the bottom of my stock. Thanks for yalls help!
Sent from my iPhone using Tapatalk
This is the stock off the 111 Xp that I bought which is a totally different dbm system.
Sent from my iPhone using Tapatalk
Send it back? Usually they will take it if no work done on it. Last stock I bought they flat said to if not right.
I know exactly what you're talking about.
The new stocks don't even have a bottom metal, just a axis style magazine that latches directly to the stock.
Answer is YES. you can order a long action factory bottom metal and magazine to fit in the McMill stock.
If you want you can also order a aftermarket aics compatible bottom metal and use aics style mags.
The answer is yes, you can order bottom metal direct from savage, but I believe that the last time I ordered parts they wanted a serial number off the rifle. In your case, your 111 serial number won't jive with the type of bottom metal you want. But I believe if you find the right part number for the bottom metal you want, and call them direct, they will sell it to you.
Bookmarks