Numrich Gun Parts has a couple listed in stock.
Edit: May have jumped the gun a little bit but check with them anyway!
Anybody know where I can get an accutrigger sear spring? Mine launched when I was reinstalling my trigger and I have been unable to locate it anywhere.
Numrich Gun Parts has a couple listed in stock.
Edit: May have jumped the gun a little bit but check with them anyway!
Savage Customer Service also stocks them.....l
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
You can replace the trigger lock spring with a ball point pen spring and then use the lock spring for the sear spring. Tried this on mine and it improves the trigger pull a lot.
I will send you one I took off another because it had a slightly higher pull weight than I wanted. It might have been 3.5 pounds or so at the bottom end. Who knows, it might be just what you're looking for. They seem to work differently on different guns, sometimes.
Just to be clear the spring I am looking for is the sear spring, or trigger return spring. Looks like a right angle rather than a coil
Come on, make up your mind.....it's either a sear return spring or a trigger return spring. They are not the same.
"As long as there's lead in the air....there's still hope.."
Sorry, I did not see you had responded to my offer.
In any event, the SEAR spring is the one that has the ends at right angles to each other.
The trigger return spring is the coil spring that allows you to adjust for trigger pull.
I was offering the trigger return spring (coil). can't help you with the sear spring. As said above, Savage will sell you one if you offer to sign a release form. no big deal.
Yes Sear spring. I thought everyone might be confused when we started talking about replacing springs with ball point pen springs.
PM inbound
Bookmarks