Made it to the range on Sunday for a couple of hours.

The gun was supposedly factory bore sighted faith the Nikon BDC 3-9x40 it came with. At 40 yards the gun was not even on paper. After about 20 minutes till range was cold, 6 Remington core lokt rounds,a lot of head scratching and close inspection I found the scope was loose not only in the rings but also on the rail. So much for dicks sporting goods telling me it was factory bore sighted.

luckily I had some Allen wrenches in my box. Realigned scope, tightened rail mounts and rings. Pulled bolt out and set both cross hairs and line of sight through barrel roughly on paper. First shot with core lokt was about 3" right. Second round was almost touching.

Fired 2 hornady American whitetail 150 he and these were slightly higher. Zeroed in with these rounds at 40 yards. Next round at 100 yards. Both white tail 150 and superfotmance 180 were shooting about the same with groups slightly under 2".


Gotta buy buy more factory rounds and make a couple more trips.

Thanks for for all your help.