**UPDATED**
12K Bolt head,RH, Short Heavy Magnum push feed 106190 $29.00(transfer parts from your bolt head to complete)
11G Firing Pin, Short Heavy Mag 105758 $5.00 (threaded and adjustable)
12J Front Baffle, RH, Heavy Mag 106429 $2.00 (check to see if your rifle already uses this one in the parts finder, if so, you don't need it)
Your extractor will work with the WSM, transfer it to the new bolt head.
Those should be the only parts you will need.
You do not have the Axis style firing pin. If you did, it would protrude into the Allen socket with the bolt removed (cocked) Yours is adjustable and will need to have the protrusion set when you install the new firing pin (search the FAQ)
You also need to verify whether your action is large shank or small shank, to ensure that you get the correct barrel shank size to match your action. Identification tips are also in the FAQ's in the top tab.
Reply With Quote
Bookmarks