If you use the Controlled round feed bolt head, you'll have to have some machining done to your action to install the standing ejector. Otherwise you won't have a means for ejection. You want the push feed bolt head. You will also need to use the longer WSM firing pin with either. If your firing pin is adjustable, I may be able to help you out with that. I also have the part numbers for the correct bolt head and extractor if you need them. Order your parts from Savage. Use the parts finder to get the correct information. I have serial numbers for WSM based rifles that will allow you to order the parts. Try H743895. Compare part numbers between your serial number for the bolt assembly, you'll easily spot the parts that are different. You'll need to sign a release waiver from Savage to buy the "gunsmith only" parts. Fax it back to them and you're golden.
Bookmarks