Quote Originally Posted by rbp75503 View Post
If you are interested in additional info regarding cold bore shots, the following vid is very useful.
https://www.youtube.com/watch?v=ewPWplWu6ZQ

There is considerable discussion on the different shooting forums about the use of colloidal graphite, i.e. Lock-Ease. Most of the discussion is around barrel break-in. However I have found that a saturated patch down the barrel after cleaning has settled down my clean bore shot. Lock-Ease's carrier will evaporate leaving only the graphite.

Bob

ive played around with lock ease and the problem i found is that as the graphite burns out the pressures go up which increases velocities and my shots start to rise.
have you had this happen?