IMO a bull barrel is too heavy and unbalanced for Pdogs and the like especially with that stock.
Okay for full on FTR target etc though with a heavy stock.
I would buy a Varmint profile barrel myself to keep the weight down and actually I am about to sell my new bull barrel just for that reason..
For just me I dont care for thumbhole stocks either but to each their own.
Also I would buy a 7 twist barrel just in case you ever want to shoot 90 gr bergers. 7 twist is fine unless you are shooting
something like 35-40 gr bullets then you might overspin. That said I loaded mine with 52 gr amaxes and it was the most accurate bullet I loaded at 1/4" groups and I never had a bullet blow up.
If you want to do a very nice matt finish stock then get it unfinished and do a Permalyn Sealer wet sand finish on it.
It takes about 20+ coats but creates a very nice matt finish.
Start off with a normal sand like with a sanding sponge then a couple of coats of Permalyn Sealer with a brush then start wet sanding with 180 and ending up with 320 or 400. Also you wipe it down after each wet sand and hang and let dry.
Bookmarks