I used lamp cord all thread to pillar bed mine.

I am a hack, but I just drilled the holes out larger than the all thread, cut the front post so that the action screw head was below flush on the stock. I cut the rear one to make the trigger guard flush with the stock, and cut a recess for the sear/trigger stuff. then I put devcon in the screw holes, smeared the pillars with it too and bolted it together. Use a lot of release agent. Then put more on. I pillar bedded it, then went back and bedded the action and recoil lug. I was a lot more brave on my $100 boyds stock than I would be on a $500 one.