Bolt Disassembly

[bmt]

Here are the parts basically in sequence of assembly.



1. Remove the bolt assembly screw.
2. Remove the bolt handle and rear baffle.
3. Slide the cocking piece sleeve back.
4. Remove the cocking piece pin.
5 Remove the firing pin assembly.
6 Remove the bolt retaining pin.
7. Remove the bolthead,front baffle and spring washer.

Reassemble in the reverse order.

Bill

Hi Guys:

I don't log in here much, just lurk.

But I took my model 16 (LH) into the gunshop with a question and they disassembeld the bolt. (LONG STORY)

ANyway, the bolt lokks fine, but does not cock. It cocks on opening, then "uncocks" on closing.

Any tips where the bolt re-assembly failed?

BTW, it shot fine one hour before they dis-assembly. It was extracting but not ejecting. fully dis-assembled cleaned and re-assembled.

Thanks,

BMT