Results 1 to 11 of 11

Thread: Edge Bolt Disassembly

  1. #1
    frazer
    Guest

    Edge Bolt Disassembly

    Does anyone have instructions or pictures on how to disassemble the bolt for a Savage Edge? I would like to see what parts are interchangeable between the other savage bolt action models.

  2. #2
    Paid Member 82boy's Avatar
    Join Date
    Dec 2006
    Location
    Ohio
    Posts
    3,418

    Re: Edge Bolt Disassembly

    I will save you the trouble.
    The bolt head is interchangeable, and the rest has nothing in common with the 110/10 series rifles. The internals are closer in design to a 220 shot gun.
    The bolt comes apart like any savage rifle.
    This is a exploded view of a Edge bolt.
    [img width=600 height=450]http://i34.photobucket.com/albums/d145/82boy/boltdisasembled.jpg[/img]
    Patrick
    "To win in bench rest, you dont have to shoot small groups, you just can't shoot any big ones." ;)

  3. #3
    Paid Member
    Join Date
    Dec 2006
    Location
    Glenwood Arkansas
    Age
    58
    Posts
    465

    Re: Edge Bolt Disassembly

    Are the bolt heads and baffles the same as the 110 or 10?

  4. #4
    Paid Member 82boy's Avatar
    Join Date
    Dec 2006
    Location
    Ohio
    Posts
    3,418

    Re: Edge Bolt Disassembly

    The Edge doesn't have a "rear" baffle, it has a coking ramp built into the back of the bolt handle, between it and the cut in the back of the receiver, this primarily extracts the case. As stated before the bolt head is the same. The front baffle is slightly different, not sure if they interchange.(I dont see why not.) As you can see in the picture the front baffle has a set cut in it to allow the bolt to travel further toward the rear.
    Patrick
    "To win in bench rest, you dont have to shoot small groups, you just can't shoot any big ones." ;)

  5. #5
    2ndchance
    Guest

    Re: Edge Bolt Disassembly

    Does anyone know if the bolt handle is interchangeable with the 10/110? I like the larger tactical bolt handles.

  6. #6
    Paid Member 82boy's Avatar
    Join Date
    Dec 2006
    Location
    Ohio
    Posts
    3,418

    Re: Edge Bolt Disassembly

    Quote Originally Posted by 2ndchance
    Does anyone know if the bolt handle is interchangeable with the 10/110? I like the larger tactical bolt handles.
    Nope, no even close.
    Patrick
    "To win in bench rest, you dont have to shoot small groups, you just can't shoot any big ones." ;)

  7. #7
    rocket35
    Guest

    Re: Edge Bolt Disassembly

    I was looking at the bolt on an Axis this past weekend, and there wasn't the standard allen wrench type bolt at the end. Is the picture you posted of an Axis / Edge, or a standard savage?

  8. #8
    Slim Jim
    Guest

    Re: Edge Bolt Disassembly

    Quote Originally Posted by rocket35
    I was looking at the bolt on an Axis this past weekend, and there wasn't the standard allen wrench type bolt at the end. Is the picture you posted of an Axis / Edge, or a standard savage?
    Make certain there is no cartridge in the chamber. Put the bolt in the rifle and cock it. Dry fire and then check the back of the bolt. Should be 1/4" Allen head to loosen it. Take bolt out of rifle and finish unscrewing it by hand. This is on an Edge bolt, should be the same on the Axis ?? Good luck.

    Mike

  9. #9
    rocket35
    Guest

    Re: Edge Bolt Disassembly

    Thank you, it must have been that the bolt was out. It makes sense now.

  10. #10
    Frank44
    Guest

    Re: Edge Bolt Disassembly

    I can't find an Allen screw anywhere on the back of the bolt on my Savage Edge. How do I get the back cap off?
    Frank

  11. #11
    Paid Member 82boy's Avatar
    Join Date
    Dec 2006
    Location
    Ohio
    Posts
    3,418

    Re: Edge Bolt Disassembly

    Quote Originally Posted by Frank44
    I can't find an Allen screw anywhere on the back of the bolt on my Savage Edge. How do I get the back cap off?
    Frank
    de-cock it.
    Patrick
    "To win in bench rest, you dont have to shoot small groups, you just can't shoot any big ones." ;)

Similar Threads

  1. Need help with Bolt Disassembly on a Model 3A
    By scottvt98 in forum Modern Savage Rimfires
    Replies: 1
    Last Post: 05-24-2012, 10:16 PM
  2. MOVED: Edge Bolt Disassembly
    By 82boy in forum Savage 110-based Centerfire Rifles
    Replies: 0
    Last Post: 02-24-2011, 09:55 AM
  3. Savage 111 bolt disassembly
    By squirrelduster in forum Savage 110-based Centerfire Rifles
    Replies: 2
    Last Post: 02-17-2011, 12:08 AM
  4. Bolt Disassembly
    By 2Savage in forum Savage 110-based Centerfire Rifles
    Replies: 39
    Last Post: 01-26-2011, 05:34 AM
  5. More on bolt disassembly, or am I a moron
    By us920669 in forum Savage 110-based Centerfire Rifles
    Replies: 4
    Last Post: 01-06-2011, 12:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •