Quote Originally Posted by foxx View Post
There you go.
Quote Originally Posted by Maztech89 View Post
Why don't you just trim them and be done with it? Save you from messing around with washers and stuff. Just keep taking some off and trying them out until you can fully operate the bolt with no interference while having them tightened down.
ALL,
These have all been trimmed. They DO NOT bottom out on the action anymore...what is happening is these NEW screws I got have such tall heads. The heads are taller than the hole in the stock...there is NOTHING I can trim on the head itself. I got the wrong screws. I guess what I need is button top screws which have a much shorter head. In the one picture comparing the screw heads, you can see what I am talking about.