Joeb33950, you have two posts up right now regarding reloads and accuracy issues. What I see on both is a lack of knowledge of load development. As been mentioned above, I have no idea what in looking at with your first pic. Shooting 12 single shots of differing charge weights isn't telling you a thing. A ladder test involves loading 3-5 cartridges of each charge and shooting each charge at a different target dot to evaluate group size. Once you determine which charge gives you the best group you can either further refine it by doing the same style test with varying seating depths, or load up a batch as is. THEN you can adjust you scope for zero. It looks like you are loading one of each charge to see which gets you closest to zero. You're blaming the scope here, and the barrel in the other thread when the obvious problem is your data gathering. Read up on ladder testing and run a proper one. Then report back. I'll venture a guess you'll find your scope and barrel are both just fine.