I figured it out.
I am having a problem with an accu trigger on a model 12 I re-barreled to a 6BR. I got a B & C Tactical Medalist stock for it. I have free floated the barrel and the rear tang. With the rear action screw tightened down the bolt release lever moves down as the bolt closes jamming the accu trigger release. (see pic on left). The pic on the right is how it should be. Any idea what is happening and how I can correct it?
[IMG][/IMG][IMG][/IMG]
I figured it out.
What was the problem?
Where the stock was inletted for the trigger, at the very back they left a shelf. When the rear action screw was tightened that rear lever on the trigger made contact with the shelf. One minute with the Dremel was all it took sand out a pocket for the trigger.
While your'e tinkering, turn your scope base around...it's backwards.
"As long as there's lead in the air....there's still hope.."
LOL good eye Sharpshooter
Replacing the accutrigger with a Timney in a 12 BVSS I had the exact same issue. After about 800 rounds the accutrigger started giving me a lot of grief.
Bookmarks