tag
Looking at a rebarrel, and trying to figure out what to get. I've seen good reviews from all of them. Personally, I feel like the Brux from SSS is in a different league, being cut rifled instead of button rifled, but at $440+, I'm not sure it's worth it to me at this point. It's also worth noting I've sent them an email with no response yet, and after doing some searching, it seems like they're a pretty hard company to get ahold to, and tend to have a pretty long wait.
CBI, Shillen, and McGowen all seem to get pretty solid reviews, and are probably on the the same playing field. Are they worth the extra money over an Apache barrel though? I've seen some pretty good reviews from Apache, however I've also heard ER Shaw and Green Mountain stuff is sub par at best and not any better than a factory Savage barrel...
So many options...
Any input is greatly appreciated.
tag
What caliber are you looking at, and more specifically what chambering.
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
For what use? Target shooting from a bench? Hunting?
FTR in 223, BA LE Tactical in 308, 110 Flatback in CBI 6mmBR Norma, Others
Buy whatever you can get that you like that is in stock somewhere. For average shooting and hunting you can't go wrong with any of them.
Target. Long range. Mostly 500-1300yds. Not sure how the chambering is relevant... but I haven't decided on a chambering yet, but more than likely it'll be 260 or 6.5 Creedmoor.
I'm in the same boat looking for a .223 600 yard target gun. I'm interested in the responses. I've been considering sinarms for a action truing and a brux.
Don't believe what hear or read until you have actually used said item.
I have a inexpensive ER Shaw .223, 24" varmint barrel from midwayusa and have not 1 issue with shooting to 700 yards and it prints in the .450-.600" with my hand loads at 100 yds. My real targets are p-dogs and it hits what I aim at unless a slight breeze of 15 mph+ messes me up.
I also have a .223 McGowan drop in, 20p & .223 CBI drop in and they are all more than good to go.
The above do not mine copper, shoot all sub moas w/my loads.
I buy what I can get in my hands within a decent time frame for my builds.
My top performing barrels to date:
1. 6WSM built by Apache on a Green Mountain Blank (it has given me a consistency of groups well under 1/2 MOA, and a few under 1/4))
2. 6BR by CBI from NSS (normally shoots from 1/4 to 1/2 MOA)
3. 308 12FV Savage as it left the factory (consistently under 1/2 MOA hot or cold bore always to POA)
4. 243AI that was rechambered from a factory Savage SS fluted Varmint barrel (always under 1/2 MOA and this barrel has quite a few rounds on her, 2500+ and still shoots great)
5. 22-250 12FV barrel (gave 1/2MOA results and was very consistent)
It is also worth noting that I have a 250AI on a Shaw blank built by Apache that I am starting to work with and on its first outing it gave me under MOA results with a thrown together load of RL22 and 120gr Hornadys. It has great promise of being a real tack driver. I also have a 450 Bushmaster barrel that Apache built for me on a Green Mountain blank, and it is shooting the factory stuff under 1 MOA and I am certain handloads will do better.
I also had a 7mm RM that was a Shaw prefit that was fitted with a brake that I bought used here in the classifieds. That thing shot 120gr Sierras into 3/8" at 100 all day long.
Point of all this rambling I'm doing is that a man that is good at what he does can make a so-so quality blank that will shoot like a dream, and on the other side of that coin a guy who isn't very good can seriously screw up a "premium" blank. Apache does great work, pays attention to detail, and makes some great barrels. My last 3 have been from him and I am getting ready to contact him to order a 4th. I figure if I can call Apache and get it built how I want it for similar money and no super long wait then that's where I will go.
I hope that some of that is helpful, CBI has treated me well, the one Pac-Nor I had shot well also, but Shaw, Green Mountain, and factory Savage barrels have done equal to or better than I can shoot so really its up to you. Talking straight factory prefits I would be most likely to go with a CBI for the value and performance over a Shaw or Savage factory barrel for example, but with Apache cutting the barrel I have confidence in his work and have no problems with Shaw or Green Mountain.
If you want a Brux I'd call Devin at Sin-Arms. He works with Brux blanks and may be able to help and does good work also.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Exactly the reason I posted this. Was hoping to find some people with actual experience to hopefully find some guidance on what to do.
Exactly the info I was looking for. I just shot Devin an email, hoping to get some idea of price on a Brux. I have a buddy that shoots nothing but high end stuff, Lilja, Obermeyer, etc, that has said the Brux is a far cry better than anything else of the stuff I mentioned. I'm just trying not to spend that kinda coin if I don't need to.
This thread is starting off exactly the way I hoped, and hope it continues. Thanks guys! Keep it coming.
I'm looking for .5" groups at 300 yards, I really want the Brux. If your looking for .5" at 100 a criterion or mcgowan will do that with ease.
I just went through this with Criterion. They were great to deal with. They will use your reamer if you want to supply one. I ordered a 30-06 and all they had was the SAAMI spec reamer, I would guess that it's the same story for .260 or 6.5.
yes, some people do.
FTR in 223, BA LE Tactical in 308, 110 Flatback in CBI 6mmBR Norma, Others
And some people drop the barrel nut all together. For instance, ER Shaw will make a shouldered barrel for your Savage, but you have to send your action to them to have it fitted. Other barrel makers do this to, of course.
If you want a Brux and SSS will not respond (they are busy) call Devin at Sin Arms. He has gone out of his way to work with me on a Brux for a Remington I am working on. The prices are the same. Sin Arms is a sponsor here I believe.
.5 at .300 yards is not going to be a barrel issue it will be an ammo and shooter deal. That's a 1/10 MOA and a goal most professional bench rest shooters dream of. But whatever you can get good results with lesser named barrel makes all depending on what your goals are. A casual weekend shooter looking to bang steel at long range will do fine with a Shaw, McGowen, Criterion, Shilen or even factory Savage varmints. If your into competition running hundreds of rounds 2-3 times a week your going to need something better. I've had a few Shaws and they performed well for the price. I'm currently using one for a 6.5-06 build. I've run a few Criterions, McGowens and Shilens and they have all been shooters. Some better than others. I'm currently running a Lothar Walther in .260 which has been fabulous. It's a 1/2 to 3/4 MOA shooter depending on the shooter and they day. I'm not a competition shooter so I have no need to spend $600 on a barrel at this time. The most I'll spend is $400 or so which is what I paid for the LW. I have paid $500 on a Lilja AR10 barrel and it was worth it. That rifle plain shot like a MOFO. Lots of choices and none are really bad. Buy the best you can afford. For me it's more about what's in stock. I hate waiting for stuff!
I've been told that the more important thing than who manufactured the blank is who is cutting the chamber. I have a Douglas 308 barrel and a Brux 7mm Rem Mag barrel both from SSS and the work is top notch. Check out who is cutting the chamber rather than get too concerned with who makes the blanks. My 2 cents.
They who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.
I totally agree, and that's why I continue to recommend Apache Gunworks because Jim is very good at getting things true to the bore and on perfect center. I believe this is why I have gotten such good results from the Green Mountain and Shaw Blanks that I have had him use to build.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
I have also heard it said that sometimes the person who is reaming the chamber TREATS the "cheap barrel blank" like it is a "cheap barrel blank" and so it turns that way. If he treats it like it's "high dollar" it turns out "high dollar" quality.
Kinda like how you treat a woman...
Bookmarks