Results 1 to 25 of 26

Thread: Axis trigger and sear just surface hardened?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-25-2014, 08:01 AM #14
    cranebird
    Guest
    It's ok that your not buying into it . You stated that you were getting the Jard trigger system but apparently you failed to read its installation instructions or you would have known step 14 of the 17 step instructions basically says the same thing.

    http://www.jardinc.com/images/storie...als/savage.pdf
    Last edited by cranebird; 03-25-2014 at 08:34 AM.
« Previous Thread | Next Thread »

Similar Threads

  1. Need a Savage trigger sear. Where to buy?
    By KTP in forum 110-Series Rifles
    Replies: 9
    Last Post: 01-13-2021, 03:32 PM
  2. Stevens 200/Savage 110 Trigger Sear
    By BigDad in forum 110-Series Rifles
    Replies: 7
    Last Post: 04-13-2018, 08:41 AM
  3. pre accu-trigger sear adjustment
    By OldDog in forum 110-Series Rifles
    Replies: 6
    Last Post: 09-10-2016, 06:33 PM
  4. Need help with old style trigger sear spring.
    By josh_m in forum 110-Series Rifles
    Replies: 6
    Last Post: 08-07-2014, 09:46 PM
  5. Moly grease on the sear/trigger engagement surface
    By Bark in forum 110-Series Rifles
    Replies: 9
    Last Post: 05-13-2010, 10:59 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules