If you have a half decent hardware store locally they may have the .125s. Better yet replace the .125" with a .140" (9/64").
If stang can't help I have about a dozen or so 125s. I don't have any of the .140s at the moment.
Bill
If you have a half decent hardware store locally they may have the .125s. Better yet replace the .125" with a .140" (9/64").
If stang can't help I have about a dozen or so 125s. I don't have any of the .140s at the moment.
Bill
Each morning eat a live green toad, it will be the worst thing you'll have face all day.
When you put it back together do it inside a large zip-lock baggie,don't ask me why I know to do this.
Ya'll hang on I'm gonna drive closer
sorry, I meant the .140.
Old Dood: Thanks. PM sent.
Pdog2062: Oh, I know all to well the advantage of using a large zip-lock bag!! It's a lesson one learns fast! LOL!
The .140" is a closer fit in the bore in the bolthead and the extractor detent. Many times with the smaller .125" the extractor doesn't always return to it's "home" position and fully engage the extractor groove in the case.
BTW, thank Fred (Sharpshooter) for that mod.
Bill
Each morning eat a live green toad, it will be the worst thing you'll have face all day.
Gotcha. Good tip.
Bookmarks