6 Creedmoor intrigues me. If the reamers are available I imagine any smith could do it.
anyone know who will make a barrel in either caliber or re cut my current barrel to this caliber?
6 Creedmoor intrigues me. If the reamers are available I imagine any smith could do it.
Reamers are available. There is several smiths chambering 6 Creed! I have an AR in 6Creed.
I'm thinking about doing another 6 creed nutless.
Last edited by Duipowerstroke; 04-03-2013 at 09:52 PM.
Who did your AR?
G.A. Precision in MO. I heard LongRifles Inc in SD is chambering 6 creed as well.
Hornady makes new correct headstamped brass which can be bought from Copper Creek Ammo, McCourt Munitions, or GA Precision. No forming just seat and roll!
I am slinging 105 AMAX just under mag length 3020FPS with a 22" barrel with brake. Almost zero recoil. Approx 7.9-8 mil to 1k.
Shouldn't be much of a problem getting a prefit barrel in one.
Looking at Pac Nor, they have several 6mm-22-250 versions to choose from.
Your load data, please sir.Originally Posted by Duipowerstroke
A 105gr Hybrid @ 3000fps from a 22" barrel would be the bee's knees...hrrrrmmmmm
Bookmarks