Results 1 to 6 of 6

Thread: Would Devcon steel hold up as a recoil lug ?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-10-2013, 01:11 AM #1
    Fast1
    Status
    Offline
    Thread Starter
    Basic Member
    Join Date
    Feb 2011
    Location
    Grand Junction , Colorado
    Posts
    23

    Would Devcon steel hold up as a recoil lug ?

    Would Devcon steel hold up as a recoil lug ? The two part type that comes in the little box that you mix together. If you were to bed a stock and ground down the stock lug , then used the Devcon as normal . With the tensile of the Devcon , since it is machinable. Just a thought . Any thoughts' on this ?
    Last edited by thomae; 01-10-2013 at 09:46 PM. Reason: Moved from another thread where it appeared to be off topic
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Steel Rings and Steel Base Rail Question
    By BigDave in forum Optics
    Replies: 3
    Last Post: 03-18-2015, 01:19 AM
  2. Devcon Plastic Steel Mixing Ratios
    By MDHOGGER in forum 110-Series Rifles
    Replies: 12
    Last Post: 01-08-2011, 11:27 AM
  3. Bedding Compond - Devcon Steel
    By shovelheadave in forum 110-Series Rifles
    Replies: 9
    Last Post: 12-12-2010, 10:30 AM
  4. MOVED: Devcon Steel Putty
    By 82boy in forum 110-Series Rifles
    Replies: 0
    Last Post: 08-09-2010, 12:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules