Hi all together!

I recently purchased a Model 10 PH (Accustock without the wedge) and faced exactly the same problem as dnsmith did. Prior to disassembling the gun for setting the trigger the tang was absolutely snug to its base on the stock without any pressure (no wear marks or scrates on the stock's paint underneeth it). When I laid the action and the barrel back into the stock I could tilt it forth and back slightly. After tightening down the screws as described the tang sticks out one millimeter opening that small gap. The weapon performs flawlessly and precisely. Nevertheless it is not as it should be and the system is now certainly under pressure. Of course I inspected the stock carefully but couldn't find anything deformed, scratched, out of shape or otherwise indicating a damage.

I found two or three entries with similar problems but none of them offered a proper solution or answer. Can anybody shed a little light on that?

Thank you guys in advance!