I ran out of things to modify on my Edge.

[fgw_in_fla]

I've had photos of this 25.06 posted before. Now that the barrel is broken in, it's got incredible consistancy / accuracy using 85gr Nosler's over 49.5 of IMR4350



How do you like the "Max Mag" hanging out the bottom. It'll hold 15 rounds comfortably. Another member did the preliminary fitting and sizing, I did the fine tuning.
The stock is almost completely solid with steel and aluminum reinforcement and lightweight epoxy. (epoxy mixed with styrofoam beads)

If you look carefully you can see where I had to grind down the bolt handle the get it past the scope eyepiece. Even with taller rings, it still hit when pulling the bolt back.

If only somone would make a decent aftermarket stock.....

Lots of fun to shoot. A little heavy with a full load but unquestionably fun.

Frank in Fla