Quote Originally Posted by kweeks10045
Self addressed stamped envelope. I would polish the sear and try the three screw adjustment first. HOWEVER...this process can be dangerous if done incorrectly. Things like the gun going off on bolt closure is way uncool. BE CAREFUL or seek help.
Yes, a plain letter size envelope size is fine. He's been doing it for a while. An unbelievable gesture.

Try the screws and the wire first. Polishing the sear is not often done or needed after adjusting the trigger and replacing the wire.

Those two things are easy for a 1st timer and can easily be undone. Polishing is up a skill level or two.

Take your time and work slow. Be safe.