Purchase a used 110 in .30/06. Shot very little. After three trips to the range, it will not shoot better than 3". This is a wood stock model from 2004. I replaced the scope, no change. Four different powders, Three different bullets, and two different primers. Groups are mostly vertical.
I borrowed a bore scope and found "pot holes" in the barrel towards the muzzle. The barrel seems pretty smooth with not a lot of copper in it.
My next step will be to pillar bed the stock. Should I try J B first?
Unfortunately, I do not own a rifle that shoots over 1.5" so this is a challenge.
Comments?
Bookmarks