Quote Originally Posted by ninosdemente View Post
Thanks for the reply.

------

Celltech, when you mounted your stock to the rifle did you experience any bolt action stiffness when the screws were torqued? I have a problem where if torqued at 60 in lbs as indicated by instructions, my bolt action is stiff. If the screws are loosen just enough, then I don't have that problem as if it were torqued. Thanks.
Sounds like your front action screw is hitting the bolt head. Loosen everything up and take out the bolt...then tighten again. Feel in the bolt chamber for the action screw and I bet it's just coming past the receiver threads. At this point you have 2 options. Either lightly grind down the stock bolt a smidge or upgrade to some nice grade 8 hex cap bolts. But you will still have to grind the cap bolt down to the right size...