Low should work. The front of the rail touching the scope bell, not the barrel will be the limiting factor.
Low should work. The front of the rail touching the scope bell, not the barrel will be the limiting factor.
Does anyone ever just Dremel those off?Originally Posted by jpdown
I usually cut them flush with the front of the action using a hacksaw, then clean up the cut end with a fine file. A black Sharpie can be used to make the cut end black again.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Thanks...
my band saw works great for that!
Posting Permissions
Reply With Quote
Bookmarks