thanks SavageShooter!!

ok so i lied and left out rinsing,drying and letting the brass cool after tumbling...i did everything below except for annealing and it took me 3 hours 25 minutes so with annealing it would be 3 hours 45-50 minutes...going to have to tighten up the time a little!!

125 case...
pop primers with a universal de-capping die
anneal....every second firing
SS tumble...1.5hrs
rinse and dry brass
spritz with sizing lube above
size
wipe lube off outside case with 70% isopropyl
trim
clean PPs with a carbide uniformer...every second firing