can not say witch one is the best,but my K&M works great
drybean
Was wandering what do you think is the better uniformer out there?
I was looking at the K&M tool, the Sinclair tool, the possum hollow and Holland tool(both of these have Large and small uniformer in same tool)
Last edited by supergolfer18; 10-03-2012 at 04:12 PM.
can not say witch one is the best,but my K&M works great
drybean
I can not say which one is the best,but my Sinclair tool works great.
There are two separate bits: one for small primer pockets and one for large primer pockets.
The bits are made of solid Tungston Carbide, so they should never really wear out.
I don't use the "screwdriver" handle that comes with the kit. Instead, I chuck the appropriate bit into my mini lathe and simply push the brass onto the bit until it stops cutting.
Sometimes my hand gets sore after several hundred rounds, but I usually only uniform the primer pocket the first time I prep brass. After that, I use a primer pocket cleaner as necessary.
It is fast and easy. I recommend it highly.
I have posum hollow and it works great, I have a russ hayden and I dont like it as much. Skip Otto machine is the best out there but Skip Otto passed away a few years ago, and there is not new ones being made.
will the possum hollow easily chuck into a drill?
Bookmarks