Results 1 to 5 of 5

Thread: new axis. 22-.250

  1. #1
    2002celica
    Guest

    new axis. 22-.250


    Just picked up a new axis 22-250 last week went to the range.
    With factory loads gun was very accurate at 100 yards. 0.407 groups with hornady
    V-max 50 grain. Should be able to do a little better when I get time to sit down and load
    Up some custom match rounds. Well I hate two things about the gun!
    1) the scope. I just picked up a vortex viper 6.5-20x44 and what bases and rings do you recommend?
    Don't want any bolt contact with the scope.

    2) trigger sucks so I took 1.5 coils off and dropped the pull weight some but not enough
    For me. What is the best trigger for the axis?

    Also anyone here in Canada building stocks for the axis?

  2. #2
    cheapshot
    Guest
    Check out this link. http://www.savageshooters.com/conten...ications-FAQ-s

    There is a fellow on here in Canada that has built some nice stocks but I think he is no longer doing it. Word is that some manufacturer has something in the works.
    Last edited by cheapshot; 03-28-2013 at 09:34 AM.

  3. #3
    2002celica
    Guest
    Thanks cheapshot! Sent him a pm

  4. #4
    cheapshot
    Guest
    No problem. Let us know what you come up with. You will see that the question of stocks comes up a couple times a week. I was there a couple weeks ago. I have a couple things cooking on my end. Will be meeting with a machinist this afternoon to take a look at an aluminum chassis set up. If all goes well, I may have an inexpensive (all relative) alternative to the factory stock.

  5. #5
    2002celica
    Guest
    Sounds interesting keep us updated as well on your progress.
    So much information on here I will be reading for days lol.
    Going to give back to all you guys on here! going to get a paid subscription.
    Keep this amazing forum going.

Similar Threads

  1. Axis vs Axis compact MV
    By jw in va in forum Axis Series Rifles
    Replies: 2
    Last Post: 12-07-2017, 12:47 PM
  2. will Axis II trigger work in a standard Axis
    By needagun in forum Axis Series Rifles
    Replies: 3
    Last Post: 07-18-2017, 03:49 PM
  3. Axis and axis II stocks
    By Bobby in forum Axis Series Rifles
    Replies: 1
    Last Post: 05-02-2016, 09:40 PM
  4. Axis vs Axis 2 with accutrigger and scope
    By Xero in forum Axis Series Rifles
    Replies: 6
    Last Post: 08-22-2014, 05:33 AM
  5. Replies: 1
    Last Post: 05-05-2013, 05:29 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •