Laser light batteries

[Monkeymaster]

Hi,
Years ago I bought a used ML-II and the gentleman sent me an laser light bore sighter.
It has screw in plastic grommets for different size bores.
It gets your scopes reticle close to impact.
I did not receive any instructions for it.
How do I open it up to replace the batteries ?
It has a black thumb switch/tumbler. Do I pry that out ?
Any help would be great !
Thanks

[Admin]

Could go here, figure out which model you have, then scroll to the bottom and click on "Manuals" under Customer Service.

[thomae]

Probably: http://laserlyteimages.com/files//manuals/MBS-1.pdf

[fgw_in_fla]

It sounds like the one I got from Cabela's a few years ago. If it has a black plastic tumbler switch with an angle cut on one side, turn it to the "on" position. the tumbler is spring loaded & will lift out if you pry it up from one end.... gently. The batteries will be inside the tumbler.

If you could put up a pic, it would be helpful.... Unless it looks like the one in the info that thomae put up. That would be the same type / kind.

Frank in Fla

[Monkeymaster]

Thanks guys, got it !