Oryx CAN be milled out to accept 3.85 CIP Magazine. Its beautiful 110FCP 300PRC

[Dave Hoback]

Jokes aside, the 300PRC IS a formidable looking cartridge. It could be argued as being the top Extended Long Range offering.

Something I’ve found interesting: There is a 300PRC & 6.5PRC... Although both ultimately lead back to the 375 Ruger, they are vastly different. It’s just seems odd. When looking at others, for instance the 6mm & 6.5mm CM, the expected is similar case size.

[Fuj']

You guys obviously prefer cool over performance. lol

Have a new MDT ORYX build going on myself presently. This one will be more then
a cool factor, and for UBR bench work. As for magazine mods, it will be only to add
a center block so I can use the center screw on a PTA. Somewhere in these forums
I have an old MDT HS3 build. It won me a few match's, but a consistant 1/3rd MOA
lost me some. Have to have it tuned for 1/4 or less. I think this one I'll shoulder up
a Hart with my 284-ELF. Having Protekor do another bag. Seems every build needs
it's own rear sleigh....

[nathantc]

Jokes aside, the 300PRC IS a formidable looking cartridge. It could be argued as being the top Extended Long Range offering.

Something I’ve found interesting: There is a 300PRC & 6.5PRC... Although both ultimately lead back to the 375 Ruger, they are vastly different. It’s just seems odd. When looking at others, for instance the 6mm & 6.5mm CM, the expected is similar case size.

i could be wrong (haven't had much interest) but i think the 6.5cm vs the 6.5prc is like standard vs magnum. If memory serves. looking at the two side by side in person at a local shop. The OAL was pretty much the same, but the PRC uses a magnum bolt face and diameter case. So just a little extra umph. Kinda like a short action magnum.

[nathantc]

Have a new MDT ORYX build going on myself presently. This one will be more then
a cool factor, and for UBR bench work. As for magazine mods, it will be only to add
a center block so I can use the center screw on a PTA. Somewhere in these forums
I have an old MDT HS3 build. It won me a few match's, but a consistant 1/3rd MOA
lost me some. Have to have it tuned for 1/4 or less. I think this one I'll shoulder up
a Hart with my 284-ELF. Having Protekor do another bag. Seems every build needs
it's own rear sleigh....

im assuming you are talking about the savage target action, single shot with the 3 action screws? If so how much is gained buy the use of that center screw? Pretty sure the FCP/BA action (like on my rifle) is the same action BUT with the bottom milled out for the magazine. It is cut to ONLY work with AICS magazines. No way could this action function with a OEM savage magazine.

Had to look thru my photos. Didn't get a photo of the magazine cut out but here is one showing pretty much just the action

https://imgdump5.novarata.net/szayfn.jpg

[Fuj']

im assuming you are talking about the savage target action, single shot with the 3 action screws? If so how much is gained buy the use of that center screw?

https://imgdump5.novarata.net/szayfn.jpg

Yeah, pretty much intended to make it as stiff and integral as possible for bench work. That front screw on
Savage actions does not have a lot of thread depth, so anything to help with recoil deflection and harmonics,
transfered thru the stock, helps. I'll also do a slight skim bedding of the v-block and that includes the lug.
And I mean slight. Just about 2 drops of Devcon slurry is all that needed.

[Robinhood]

Still waiting on the 1000 meter/yard 5 shot target.

[nathantc]

Still waiting on the 1000 meter/yard 5 shot target.

Me too lol.
its a slow process getting everything how i want it, fitting everything to me. That said the craptasitc wheeler rings are off, and the warne skyline mount is on and mocked up (waiting on a 34mm bubble level) This time i took the time to be sure the cheek rest, and scope placement fits the eye box for me spot on. The crappy wheeler rings were not only poorly made but just slightly to short to get comfortable behind the glass. The skyline is not much taller but enough so that things feel natural. Almost time to get her zeroed and see if i'll love, or hate the Strike Eagle. Wish i was rich and could just get my the MK5HD i want right now. But this, i hope will due for now. Been reading a LOT of bad about the Strike Eagle after buying it. Things i didn't see when looking into it beforehand, so i'm hoping this one is not a dud and will last while i add more funds to my firearms spending account lol

https://imgdump5.novarata.net/mg8sdz.jpg
https://imgdump5.novarata.net/o5hlf0.jpg
https://imgdump5.novarata.net/3go61x.jpg

Over cast and kinda crappy outside. Just enough gap in the rain to set up the scope for standing, sitting and prone on the trailer. The hurricane is going to miss me, but the weather is not. So i didn't try that hard to make my crappy phone take a good photo.

[Fuj']

The Strike Eagle has had it's up' and downs, The higher end magnification has been phased out.
And they are made in China. With a street value of around $ 350, Your not doing yourself a favor.
Seems to me you put some pride into this rifle. Not really sure about your barrel but too many
shooters put time and money into a good build and cheat themselves on glass.

By the way.....What barrel is that ??

[yobuck]

Have a new MDT ORYX build going on myself presently. This one will be more then
a cool factor, and for UBR bench work. As for magazine mods, it will be only to add
a center block so I can use the center screw on a PTA. Somewhere in these forums
I have an old MDT HS3 build. It won me a few match's, but a consistant 1/3rd MOA
lost me some. Have to have it tuned for 1/4 or less. I think this one I'll shoulder up
a Hart with my 284-ELF. Having Protekor do another bag. Seems every build needs
it's own rear sleigh....
Yeah but bags aint cool Fuj. lol

[nathantc]

Yeah but bags aint cool Fuj. lol
got no issue with bags, just not going to carry one around with me as i do not shoot on a range with a known set up or target distance. They work fine. Just not the intended use of this rifle. As for the barrel. The barreled action is savage 110 FCP in 300 PRC. As for the strike eagle 5-25x56 i've never seen one sold anywhere used or not for $350. I paid retail just to get the rifle going for now. About to be quite busy with this hurricane about to make landfall. If so i should have something better quite soon

yobuck. That is 2 for 2 you having something to say, without saying anything at all. Just man up and spit out. Otherwise be grumpy somewhere else.

[nathantc]

By the way.....What barrel is that ??

barreled action is OEM. This was the starting rifle savage 22088

[Dave Hoback]

got no issue with bags, just not going to carry one around with me as i do not shoot on a range with a known set up or target distance. They work fine. Just not the intended use of this rifle. As for the barrel. The barreled action is savage 110 FCP in 300 PRC. As for the strike eagle 5-25x56 i've never seen one sold anywhere used or not for $350. I paid retail just to get the rifle going for now. About to be quite busy with this hurricane about to make landfall. If so i should have something better quite soon

yobuck. That is 2 for 2 you having something to say, without saying anything at all. Just man up and spit out. Otherwise be grumpy somewhere else.


Unfortunately, I don’t believe there will be an explanation Nate. This quote by him kinda says it all: “Well ill be the first to admit that the old cliche about old dogs learning new tricks is in fact true.
Another fact is that many old dogs arent really interested in learning any new tricks.
Especially when it comes to something as basic as mounting a scope onto a rifle.”

Bet he thinks Weaver bases & Leupold/Redfield Standard steel rings are the way to go. I’m also guessing he favors wood & leather over synthetic and likely would frown upon carrying a striker fire pistol, like Glock: would instead recommend carrying a 1911GI.

[nathantc]

Unfortunately, I don’t believe there will be an explanation Nate. This quote by him kinda says it all: “Well ill be the first to admit that the old cliche about old dogs learning new tricks is in fact true.
Another fact is that many old dogs arent really interested in learning any new tricks.
Especially when it comes to something as basic as mounting a scope onto a rifle.”

Bet he thinks Weaver bases & Leupold/Redfield Standard steel rings are the way to go. I’m also guessing he favors wood & leather over synthetic and likely would frown upon carrying a striker fire pistol, like Glock: would instead recommend carrying a 1911GI.



Idk, its confusing. Trying to guess at what ever he is talking about, id start with the monopod, being as he mentioned a rear bag, past that, who knows. Bags work great, at a range. This will be a target/hunting rifle. Therefor i don't want to depend on a bag i may not have when needed. To me the logic is to practice with exactly what you intend to use. but what do i know.

As for the other guy asking about the barrel. I've yet to be disappointed in the accuracy of a OEM savage barrel, but if i am. ill have a custom one spun up to match this one. Profile, length, muzzle thread, and even the fluting (except full length vs half for aesthetics.) Seems silly to me to swap a barrel before i know if it even shoots or not. Oh well, back to being "cool" i guess lmfao

[Dave Hoback]

The “other guy” is Fuj Nate. He is one of our resident Gunsmiths & has built some awesome rigs. Very knowledgeable. I can tell you, Fuj wasn’t rebuking the barrel. His statement was simply not knowing what barrel it was. That’s all. Honestly, I didn’t either. I thought you had an aftermarket barrel as well, until you said it was OEM. And he just glanced over you said you are saving for a Leupold Mark 5HD. Fuj & I have had some really good back & forth Wildcat talk.

As for yobuck...I’ve never had a problem with him or really seen him target thread like he has this one specifically, with the quite ignorant jabs....maybe he’s having a bad week or something.

[Fuj']

Dave.....Get a SIG and pitch that Glock. I still carry my 1911 but lately the Compact in 45acp.

As for the barrel discussion ?? I can't trust the OEM barrels for my shooting. I prefer to start with
a fresh blank

[nathantc]

Dave.....Get a SIG and pitch that Glock. I still carry my 1911 but lately the Compact in 45acp.

As for the barrel discussion ?? I can't trust the OEM barrels for my shooting. I prefer to start with
a fresh blank

the only experience i have i with custom barrel makers is my 7.62x39 savage axis with a mcgowen barrel. Its shoots awesome to say the least. If this barrel does not produce the results im after, is there a specific maker/brand you feel is the best i could go with. I know i would want to stick with 26", same heavy/varmint profile, barrel fluting is more of a like than a need, but i would like it more if the fluting when the length of the barrel, not just half like this one. Most definitely would want muzzle threads.

Hopefully soon ill have the final details and can get a 100 yard zero/group to get started with. Maybe its luck, but i've yet to be dissapointed with a savage oem barrel. I know there is a lot of hate here for savage. I've tried a lot of the higher end brands, though a lot of them are nicer, i always seem to have the best accuracy consistency out of savage. The minor issues with savage are easily fixed, like extraction, ejection, and feeding. Anyway, im going to give this barrel a try before i ditch it. That said i did headspace it myself as i do every savage i buy. This one, like most i've gotten, had was a bit on the loose side of things.

"As for yobuck...I’ve never had a problem with him or really seen him target thread like he has this one specifically, with the quite ignorant jabs....maybe he’s having a bad week or something."

I have a funny way of bringing that out in people. Maybe it's because i do things my way, what works for me, not what is "mainstream". Like going out of my way for a not so common bipod configuration. It's one of those things i tell people "you really need to try it".

[Dave Hoback]

Dave.....Get a SIG and pitch that Glock. I still carry my 1911 but lately the Compact in 45acp.

As for the barrel discussion ?? I can't trust the OEM barrels for my shooting. I prefer to start with
a fresh blank

Sigs are nice. I serviced about every Sig model in existence during 2008-2010. But actually I don’t carry either. Well, technically it’s not. I carry a P80 I built myself. And of course I still love the 1911. Especially building them! But I don’t carry hammer fired period. Modern polymer frames pistils in striker fire config. No hammer, no single/double action nonsense & no thumb safety. (Aka: the Tex Grebner special) They are smaller, lighter & carry more. But I’ll always have & love shooting the 1911. The last one I built was the first gun I built after being disabled.

I do agree on barrel. I prefer starting with just a bare Action. Was just pointing point your statement wasn’t attacking, but rather simply asking what barrel it is.

[yobuck]

Dave.....Get a SIG and pitch that Glock. I still carry my 1911 but lately the Compact in 45acp.

As for the barrel discussion ?? I can't trust the OEM barrels for my shooting. I prefer to start with
a fresh blank
My son down here just bought a SIG Fuj, i dont think he has even shot it yet, i guess 9mm.
I personaly dont like semi autos of any type, so mine are all wheel guns.
I wear two, criss crossed and tied down to my legs. lol
Have you ever been over to Galeton where the bags are made?
Nice little town right on Rt 6.
It would be a nice weekend trip for you thru some very nice country.
You could stop at Benezette and see the Elk museum and of coarse lots of Elk along the way.
I fill my bags with small plasic beads making them very light but still very pliable.
I somerimes use a flat rear bag with my hand or fist on top for fine adjustment.

[nathantc]

Sigs are nice. I serviced about every Sig model in existence during 2008-2010. But actually I don’t carry either. Well, technically it’s not. I carry a P80 I built myself. And of course I still love the 1911. Especially building them! But I don’t carry hammer fired period. Modern polymer frames pistils in striker fire config. No hammer, no single/double action nonsense & no thumb safety. (Aka: the Tex Grebner special) They are smaller, lighter & carry more. But I’ll always have & love shooting the 1911. The last one I built was the first gun I built after being disabled.

I do agree on barrel. I prefer starting with just a bare Action. Was just pointing point your statement wasn’t attacking, but rather simply asking what barrel it is.

i didn't assume it was an attack, its a pretty fair question and i fully understand why a custom barrel maker has a much higher probability of making an awesome barrel vs basically a cookie cutter barrel. Its just the OEM barrel checks all the boxes of what i wanted IF ITS A SHOOTER AS WELL lol. That said, i did start this with a $1400 OEM rifle. I cannot get this action otherwise. Its a factory trued action and more ridged than a standard 110 action. So for that price, i figured id at least try the barrel.

As for carry, i 100% carry
Ill be the boring guy here because i know from first hand experience, if you ever use it, you will likely never see it again. 10+ years later after all court cases closed, I've yet to see my HK P30 again. That being said, i now full time carry a very old, Beretta 92S NOT FS just S. It was an Italian police trade in, imported into the US. Cost me a grand total of $300. You can not find a pistol in that price range to match the reliability and build quality. Also i don't want a $1000+ pistol to end up looking as sad as this beretta from holster wear, or be taken from me forever because i actually needed to use it.
https://imgdump5.novarata.net/rc1gs4.jpg
https://imgdump5.novarata.net/01e8nh.jpg

[Fuj']

My son down here just bought a SIG Fuj, i dont think he has even shot it yet, i guess 9mm.
I personaly dont like semi autos of any type, so mine are all wheel guns.
I wear two, criss crossed and tied down to my legs. lol
Have you ever been over to Galeton where the bags are made?
Nice little town right on Rt 6.
It would be a nice weekend trip for you thru some very nice country.
You could stop at Benezette and see the Elk museum and of coarse lots of Elk along the way.
I fill my bags with small plasic beads making them very light but still very pliable.
I somerimes use a flat rear bag with my hand or fist on top for fine adjustment.

Been to Galeton and the area many times. Some of the best forest off road trails
are in that area. It was always a toss up between there or Marienville.

Old carry piece when I was still shooting "IPSC" was my personal custom 3" Mod 19
.357. Of course it was loaded with upside down wad cutters. Kind of like hitting
something with a 1200 fps pan cake !!