Results 1 to 7 of 7

Thread: Jamming with failures to feed with a Savage (Stephens) model 62

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    kjhansen
    Guest

    Jamming with failures to feed with a Savage (Stephens) model 62

    I've had this rifle, which I bought used, for about 10 years and it has performed well with many many rounds fired through it. All of a sudden it's jamming almost every round with failures to feed. It doesn't lift the cartridge high enough up and the bolt slams into the bullet instead of the cartridge. This bends the bullet over and basically destroys it. I have two magazine, which I got with the gun and the problem occurs with both of them. I'm shooting Federal bulk ammo, which the rifle has always eaten with no problems before. I tend to think the springs in the magazines are worn out, but thought I'd ask the user knowledge base first. I do clean and lubricate the rifle after shooting, even just a few rounds.
    kjhansen
    Last edited by kjhansen; 08-28-2013 at 06:49 PM.

Similar Threads

  1. 62/64-Series: New Model 64 Jamming First Round
    By Aim4gold in forum Savage & Stevens Rimfire Rifles
    Replies: 5
    Last Post: 01-27-2014, 03:46 PM
  2. Savage 111 LRH 338 Lapua Jamming
    By Reachingout in forum 110-Series Rifles
    Replies: 8
    Last Post: 11-13-2012, 11:23 PM
  3. Replies: 1
    Last Post: 09-28-2010, 07:08 AM
  4. 110 ba trigger failures
    By jpeoples in forum 110-Series Rifles
    Replies: 10
    Last Post: 09-25-2010, 09:13 PM
  5. Savage 99: Model 99 Jamming
    By charvey in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 5
    Last Post: 11-22-2009, 10:55 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •