It should... When buying my 20 MOA rail I just went with one for a Savage ACCU LA for my 111. Or there is the Savage ACCU SA for short actions... I went with Blackhawk, but the EGW should be pretty much the same thing.
Was thinking about picking up a Savage 10T and 11 DOA Hunter XP both in 308. I would like to add an EGW 20 MOA mount to the 10T and upgrade the glass/rings/mount on the 11 Hunter.
Will the mount that comes with the 10T fit on the 11 Hunter?
Thanks
It should... When buying my 20 MOA rail I just went with one for a Savage ACCU LA for my 111. Or there is the Savage ACCU SA for short actions... I went with Blackhawk, but the EGW should be pretty much the same thing.
Do you know if these 2 rifles use the same magazines? ... I see they both have the bottom bolt release.
Welcome aboard
Perpetual Optimism is a force Multiplier....
Newer mod 11 rifles come with Savage Axis type of magazines. These rifles don't even have a bottom metal. It's all molded in the stock.
Older mod 11's have a bottom metal.
Can't know for certain until you have both rifles. unfortunately.
if the10 T has accustock, it also has the better mag.
Just my .02 I have a couple of the EGWs but don't care for how high they sit. Hard for me to get a proper cheek weld because of how high the EGW sits on the action.
It's personal preference but I like 2 piece dual dovetail mounts or even standard 2 piece better. They give me better access to the loading/ ejection port and keeps me from having to add a cheek riser to put my eye in line with the scope. They also give me more room to adjust fore and aft without the objective bell hitting the rail. I dont shoot long enough distance to need 20MOA but if I did need additional elevation think I'd try to get it by using some Burris rings and offset inserts to get it.
More than one way to skin a cat
BHJ
A good wife and a steady job has ruined many a great hunter.
Bookmarks