Show your tactical/precision rifle/snipery/truck axle Savage!

[TRDFurgesson]

Savage 10 FCP-HS / CDI bottom metal with AI mags / Leupold Mark 4 E/RT 8.5-25x 50mm / Warne steel rings and base / Bradley cheek rest / Atlas PSR bipod





First 3 shot group at 300 yards (Fed GMM 168 SMK)



Load development at 100 yards (3 shot groups) I thought they may be flukes but confirmed them in all three rounds at sub 1/4 moa. Original measurements done at the range with a ruler, corrected later at home with calipers. Varget and H4895 were sub 1/2 moa no better than factory GMM.


remeasured with calipers at .190"


remeasures with calipers at .150"

My Mark II has a Boyds and DIP bottom metal. Super shooter and the reason I got the model 10.



Cheers,
Bobby

[Lorenzo]

Savage 10 FCP-HS / CDI bottom metal with AI mags / Leupold Mark 4 E/RT 8.5-25x 50mm / Warne steel rings and base / Bradley cheek rest / Atlas PSR bipod




First 3 shot group at 300 yards (Fed GMM 168 SMK)



Load development at 100 yards (3 shot groups) I thought they may be flukes but confirmed them in all three rounds at sub 1/4 moa. Original measurements done at the range with a ruler, corrected later at home with calipers. Varget and H4895 were sub 1/2 moa no better than factory GMM.


remeasured with calipers at .190"


remeasures with calipers at .150"

My Mark II has a Boyds and DIP bottom metal. Super shooter and the reason I got the model 10.



Cheers,
Bobby

Good God that is a sweet gun. Setup perfectly IMO.

[_N2o_]

... My Mark II has a Boyds and DIP bottom metal. Super shooter and the reason I got the model 10.
Cheers,
Bobby

We are in the same boat !

Had the Mark II for some time, was looking for my first bolt .308. Savage was a no brainer. I was searching for a 10 TR.
I found this gem last week used for a bargain !
The duo is now complete !

In front :
Savage 10 FCP McMillan .308
Bedded by gunsmith
Leapers 8x32x50 illuminated
20 moa rail
Weaver tactical ring
Swivel bipod


In the back :
Savage Mark II TRR .22
Tasco Varmint 6x24x42
Ebay Bipod

[07redsled]

[IMG][/IMG]

[IMG][/IMG]

finally got some paint on it , and just started a new barrel order going to 338 rum now ..... cant wait should be a "blast" compared to the 338 win mag it is now