Anyone rebarrel your Axis to another caliper yet?

[drybean]

You do not need a barrel vice, you have a action wrench
if you need to extend the nut wrench use a 1/2in breaker bar
myself I use a 3lb dead blow hammer

If you want to drive to Kennedy Meadows I will change it for you

[bloodhawke83]

You do not need a barrel vice, you have a action wrench
if you need to extend the nut wrench use a 1/2in breaker bar
myself I use a 3lb dead blow hammer

If you want to drive to Kennedy Meadows I will change it for you

ok, thanks for the offer. i planned to do this at my friends shop, depends if i get the bolt on time and he has free time. i want to get it done before ssz7.0. :)

i ordered the bolt on 02/10/2016 and should come in some time this month, i hope. my rem700 bolt is already in transit.