Yes you can change the Model 10 308 to DBM for sure since its a Short Action. If it is a Centerfeed magazine then you can do it with factory parts quite easily with a stock change or inlet performed. If its the older Staggerfeed then you will have to go with a Aftermarket DBM setup like CDI or similar.
The 110 in 22-250 is a Long action that is only cut out for a Short action magazine, but due to the longer action length I do not believe there is a way to get there with factory parts. I have not heard of any aftermarket kits for Long Actions with Short magazines but do some checking as there could be something out there I am unaware of.
Read this ARTICLE to identify your magazine style and go from there.
As to caliber switches this ARTICLE should help you out. Also with your 110 you can run 30-06 length rounds that use a .473" bolt face, but you will have to run them as a single shot due to your short magazine.
Bookmarks