1) In the process of converting a Model 10 in 7mm-08 to 300WSM. What I needed was the magnum bolt head (PTG), small firing pin, and bolt head retaining pin for the small firing pin. My rifle is from 2001 and had the large firing pin and the PTG head is for small firing pin. Not sure when/what firing pins are what years/models.
I only bought the barrel nut wrench and action wrench from NSS. No need for a barrel vise. Wouldn't hurt to buy new lug and nut. Ordered my gauges from Manson.
3) Have the new ELF trigger, but need a new sear and my rifle and chassis is off for Cerakote so no input yet. If I can't get a sear for some reason I'm going to get a Jard as it is a complete trigger replacement, just wish they had a heavier option.
Bookmarks