I do apologize if i posted in the wrong area
hi guys, just joined and I have a question. I just purchased a savage 111 in 30-06 from my brother due to financial reasons. I am not really in need of an 06 and was wondering what varmint caliber I can change my 111 to. It has a synthetic stock with a blind mag. Any help and advice would be appreciated
I do apologize if i posted in the wrong area
Welcome to the forum and enjoy!
If you reload, it opens up more opportunity, esp. if you're into wildcatting.
The easiest if you reload, is to load a varmint load depending on range and what you're going after, i.e., 155 Berger VLD. You can also load sabots (like the accelerators) >>> http://www.sabotreloadingpro.com/.30_06
Without changing bolt face you can just re-barrel it (lot of good choices in prefit barrels) to one of the list below ...
This is just a start, I'm sure will be chiming in soon.Long actions with a bolt face .DIA of .470 +/-
220 Swift, 6mm Rem, 240 Weatherby Mag, 257 Roberts, 25-06 Rem,
6.5x55 Swedish, 270 Win, 7x57 Mauser, 7x64 Brenneke, 280 Rem, 30/06 Springfield,
Good luck and happy safe shooting/hunting.
Ed
Last edited by FEENIX; 01-04-2015 at 03:19 PM.
110 gr bullet over 60 gr of 4895 at 3500fps+ sounds like a good varmint round to me.lol
Or you could always go to the 2506. 75 gr v max at 3900fps tears coyotes up, and 4200 in my 12tw 2506ai
Before Savage developed their short action receiver, all factory chamberings were done on a long action receiver. Capable varmint rounds such as the 223 Remington, 22/250, 243, 250 Savage were all based off the 110 model. With the right barrel, baffles, bolt head, and magazine box/follower just about anything is possible.
Originally Posted by keeki
Guess it doesn't really matter. If ya cant afford $15, you won't be buying much anyways
Bookmarks