Do I need to petition the Underwriter's Laboratory to issue a new safety warning label for the forum that reads: "Do not engage in discussing gunsmithing while under the influence of opioids such as oxycodone, percocet, and/or vicodin"
Do I need to petition the Underwriter's Laboratory to issue a new safety warning label for the forum that reads: "Do not engage in discussing gunsmithing while under the influence of opioids such as oxycodone, percocet, and/or vicodin"
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
Last edited by LDSILLS; 03-29-2024 at 10:14 AM. Reason: DRUGS!!!
Hey, this was fun!! I love a bit of off topic stuff
Ok... haven't been drinking- smoking- or taking pills- so "should" be safe to post....
Floating bolt head...-- so now we have both recoil lugs making good contact- but if things are not true and the "floating design" is why they are now making contact then that means the bolt head is not sitting completely true- which would mean that the brass is not making contact with the bolt face on all sides and you would still have a similar issue as the one you are trying to correct?
Bookmarks